如何为STEVAL-SPIN3202生成项目代码？

STSPIN32F0A包括STM32F031
http://www.st.com/resource/en/datasheet/stspin32f0a.pdf



以下为原文




STSPIN32F0A include STM32F031

http://www.st.com/resource/en/datasheet/stspin32f0a.pdf

自从
当前的STMCWB 5.0不支持STEVAL-SPIN3202，我放弃了它并切换到支持的电路板组合：NUCLEO-F302R8和X-NUCLEO-IHM08M1电机控制器板。
在这里找到了类似的问题
https://community.st.com/0D50X00009XkWsFSAV
 用文件https://community.st.com/s/contentdocument/0690X0000060ECFQA2
 
 注意：原始帖子包含大量线程对话，只能迁移到第9级



以下为原文




Since the
STEVAL-SPIN3202 isn't supported by the current STMCWB 5.0, I abandoned it and switched to a board combination that is supported: a NUCLEO-F302R8 and X-NUCLEO-IHM08M1 motor controller board.

Found a similar question here
https://community.st.com/0D50X00009XkWsFSAV
with a file https://community.st.com/s/contentdocument/0690X0000060ECFQA2

Note: the original post contained a large number of threaded conversations and was only able to be migrated to the 9th level

到目前为止，我对STSPIN32F0和STSPIN320A的广告以及STEVAL-PIN3202的广告效果感到非常反感，但实际可用的支持示例有多少灾难。该描述表明它完全支持STSW-TM32100 FOC软件开发套件，但试图将其与sdk一起使用只会导致完全挫折并大幅降低使用任何类型ST产品的愿望。我尝试的所有东西最终都是浪费时间和金钱，这些都是行不通的。我过去常常对ST有更高的评价，但我的信念在每次失望时都在缩小。



以下为原文




So far, I have been completely disgusted with how great the advertising makes the STSPIN32F0 and STSPIN320A sound as well as the STEVAL-PIN3202, but how much a disaster the actual available support examples are. The description says it fully supports the STSW-TM32100 FOC software development kit, but trying to use it with that sdk has only lead to complete frustration and a substantial reduction in desire to use ST products of any kind. Everything I try ends up as a waste of time and money that does not work right. I really used to have a much higher opinion of ST, but my faith is shrinking with each disappointment.

看最后一行



以下为原文




look at the last line