嗨，我试过通过DfuSe Demo升级固件，但它挂了
在此之后，我发现我的STEVAL-MKI109V1板已经砖了。
我可以使用Nucleo Board的嵌入式STLink再次闪存。我可以测试它并且我已经阅读了内存内容，因此我对能够在其上编写二进制文件非常有信心。
有人可以给我发送这个板的二进制图像吗？
PS：我试图从''stsw-mki109w.zip''中的.dfu文件中提取.hex图像，但是它们都大于64kB（MKI109V1板上的
STM32F102R8T6的大小）
以上来自于谷歌翻译
以下为原文
Hi, I've tried to upgrade the firmware via DfuSe Demo, but it hung
After this, I've discovered that my STEVAL-MKI109V1 board has bricked.
I can flash it again using a Nucleo Board's embedded STLink. I could test it and I've read the memory contents, so I am very confident about being able to write a binary on it.
Is there someone who could send me a binary image for this board?
PS: I've tried to extract .hex images from .dfu files inside ''stsw-mki109w.zip'', but all of them are bigger than 64kB (the size of STM32F102R8T6 that is on MKI109V1 board)
举报
