我们最近尝试使用CY7C68013A-56LTXC捕获并行的8位MPEG TS,并将这些MPEG TS送到USB端口。
为此,我们参考了设计FX2LPYDBMH THZTV
tiGLE,并准备了我们自己的
PCB,没有调谐器和去调制器,在我们的PCB中,我们使用CY7C68013A上的并行TS,并使用控制中心编程的UBTV和MPEGYFLE的预构建HEX文件。
在此之后,PC仍然无法捕获/记录MPEG TS文件。即使在设备树中,我们的PCB检测为DMPTV和CyPress FX2LP流线型示例设备。
请提出纠正措施,帮助我们摆脱这种局面。
当做
赛蒂什P
以上来自于百度翻译
以下为原文
We Are recently trying to capture parallel 8 bit Mpeg TS using CY7C68013A-56LTXC and get these MPEG TS to USB port.
for this purpose we have referred design
FX2LP_DMB_TH_TV_Dongle and prepared our OWN PCB without Tuner and de-modulator , in our PCB we use to give Parallel TS on CY7C68013A , and using control center fprogramed pre build HEX file of USBTV & MPEG_Free .
after this PC is still not able to capture / record MPEG TS file . even in device tree OUR PCB detected as DMBTV and Cypress FX2lp Streamer Example device .
please suggest corrective action to help us to move out from this situation.
Regards
Satish P.