无法从应用程序跳转到引导加载程序

大家好，
我正在使用两个不同的应用程序 - 启动加载程序应用程序和主应用程序。引导加载程序大小限制为64k，主应用程序起始地址更改为64K。从bootloader跳转到主应用程序工作正常（跳转到0x00010000）。但是，当我尝试从主应用程序跳转到引导加载程序起始地址0x00000000时，我在UDE中收到错误响应为''''，请找到附加的错误屏幕截图。
我正在使用SPC560B54L5 EVK和SPC5Studio 5.2.3。
我附上我的示例测试应用程序供您参考，请提供解决问题的建议。
提前致谢，
带着敬意，
R.Santhamurthy

＃SPC5



以下为原文




Hello All,
I am working with two different applications - boot loader application and main application together. The bootloader size is limited to 64k and the main application start address  changed to 64K. The jump to the main application from bootloader works fine(jumping to 0x00010000) . But when I am trying to jump to bootloader start address  0x00000000 from main application I am getting the error response as '''' in UDE,Please find the attached Error Screenshot.
I am using SPC560B54L5 EVK along with SPC5Studio 5.2.3.
I am attaching my example test applications for your reference kindly check and provide your suggestion for resolving the issue.
Thanks in Advance,
With Regards,
R.Santhamurthy

#spc5